Integrated In†Situ Characterization of a Molten Salt Catalyst Surface: Evidence of Sodium Peroxide and Hydroxyl Radical Formation.

Sodium-based catalysts (such as Na2 WO4 ) were proposed to selectively catalyze OH radical formation from H2 O and O2 at high temperatures. This reaction may proceed on molten salt state surfaces owing to the lower melting point of the used Na salts compared to the reaction temperature. This study provides direct evidence of the molten salt state of Na2 WO4 , which can form OH radicals, using in situ techniques including X-ray diffraction (XRD), scanning transmission electron microscopy (STEM), laser induced fluorescence (LIF) spectrometry, and ambient-pressure X-ray photoelectron spectroscopy (AP-XPS). As a result, Na2 O2 species, which were hypothesized to be responsible for the formation of OH radicals, have been identified on the outer surfaces at temperatures of ≥800 °C, and these species are useful for various gas-phase hydrocarbon reactions, including the selective transformation of methane to ethane.

Visualizing nanoparticle mobility in liquid at atomic resolution.

Gold nanorods are widely known for their photothermal properties to treat solid tumors. Our work demonstrates the unrealized capacity to image these reagents in liquid at high resolution using Transmission Electron Microscopy (TEM). Here we perform the first atomic measurements of functionalized nanorods in solution while visualizing their dynamic behaviour with TEM.

Electron beam synthesis of metal and semiconductor nanoparticles using metal-organic frameworks as ordered precursors.

We demonstrate a versatile, bottom-up method of forming metal and semiconducting nanoparticles by exposing precursor metal-organic frameworks (MOFs) to an electron beam. Using a transmission electron microscope to initiate and observe growth, we show that the composition, size, and morphology of the nanoparticles are determined by the chemistry and structure of the MOF, as well as the electron beam properties. Zinc oxide, metallic indium and copper particles were produced with narrow and tunable size distributions comparable to those obtained from state-of-the-art methods. This method represents a first step toward the fabrication of nanoscale heterostructures using the highly controlled environment of the MOF pores as a scaffold or template.

Three-dimensional pore evolution of nanoporous metal particles for energy storage.

A well characterized and predictable aging pattern is necessary for practical energy storage applications of nanoporous particles that facilitate rapid transport of ions or redox species. Here we use STEM tomography with segmentation to show that surface diffusion and grain boundary diffusion are responsible for pore evolution at intermediate and higher temperatures, respectively. This unprecedented three dimensional understanding of pore behavior as a function of temperature suggests routes for optimizing pore stability in future energy storage materials.

Assessing the purity of metal-organic frameworks using photoluminescence: MOF-5, ZnO quantum dots, and framework decomposition.

Photoluminescence (PL) spectroscopy was used to characterize nanoscale ZnO impurities, amine-donor charge-transfer exciplexes, and framework decomposition in samples of MOF-5 prepared by various methods. The combined results cast doubt on previous reports describing MOF-5 as a semiconductor and demonstrate that PL as a tool for characterizing MOF purity possesses advantages such as simplicity, speed, and sensitivity over currently employed powder XRD MOF characterization methods.

Effect of electrolyte and adsorbates on charging rates in mesoporous gold electrodes.

The classical model for porous electrodes reported by De Levie several decades ago (and expanded upon since then) was developed mainly to describe pores with micrometer-scale diameters. Presumably it will break down as pore diameters approach atomic dimensions. Mesoporous gold formed by dealloying is a valuable test platform for this because its 10 nm pores are on the boundary of this expected breakdown and because the electrochemical and surface properties of gold are relatively well understood. The De Levie model works for these electrodes at high salt concentrations, but under dilute conditions, there is not enough salt locally to charge the interface, increasing real impedance on intermediate time scales. Specific adsorption on pore walls can cause a similar increase and also cause an effective mobility decrease, tunable through electrolyte choice and the use of alkanethiol monolayers. These effects are not expected in micrometer-scale pores and are important considerations when designing devices with nanoporous electrodes.

Silver cluster formation, dynamics, and chemistry in metal-organic frameworks.

Synthetic methods used to produce metal nanoparticles typically lead to a distribution of particle sizes. In addition, creation of the smallest clusters, with sizes of a few to tens of atoms, remains very challenging. Nanoporous metal-organic frameworks (MOFs) are a promising solution to these problems, since their long-range crystalline order creates completely uniform pore sizes with the potential for both steric and chemical stabilization. We report a systematic investigation of silver nanocluster formation within MOFs using three representative MOF templates. The as-synthesized clusters are spectroscopically consistent with dimensions < or =1 nm, with a significant fraction existing as Ag(3) clusters, as shown by electron paramagnetic resonance. Importantly, we show conclusively that very rapid TEM-induced MOF degradation leads to agglomeration and stable, easily imaged particles, explaining prior reports of particles larger than MOF pores. These results solve an important riddle concerning MOF-based templates and suggest that heterostructures composed of highly uniform arrays of nanoparticles within MOFs are feasible.

Nanopipes in gallium nitride nanowires and rods.

Gallium nitride nanowires and rods synthesized by a catalyst-free vapor-solid growth method were analyzed with cross section high-resolution transmission electron microscopy. The cross section studies revealed hollow core screw dislocations, or nanopipes, in the nanowires and rods. The hollow cores were located at or near the center of the nanowires and rods, along the axis of a screw dislocation. The formation of the hollow cores is consistent with effect of screw dislocations with giant Burgers vector predicted by Frank.

Electronic and structural characteristics of zinc-blende wurtzite biphasic homostructure GaN nanowires.

We report a new biphasic crystalline wurtzite/zinc-blende homostructure in gallium nitride nanowires. Cathodoluminescence was used to quantitatively measure the wurtzite and zinc-blende band gaps. High-resolution transmission electron microscopy was used to identify distinct wurtzite and zinc-blende crystalline phases within single nanowires through the use of selected area electron diffraction, electron dispersive spectroscopy, electron energy loss spectroscopy, and fast Fourier transform techniques. A mechanism for growth is identified.